Call Us : +91 (22) 66355665 | Mobile No. / Whats App - +91-7506484464     |     Send Your Enquiry : sales@arrowppi.com

High Nickel Alloys Pipes

HIGH NICKEL ALLOY PIPES & TUBES GRADES

Nickel 200 - Pipes & Tubes Hastelloy C22 Pipes & Tubes Monel 400 Pipes & Tubes
Nickel 201 - Pipes & Tubes Hastelloy C276 Pipes & Tubes Monel K500 Pipes & Tubes
 Alloy 330 Pipes & Tubes Hastelloy B2 Pipes & Tubes Monel R-405 Pipes & Tubes
 Alloy 20 Pipes & Tubes Hastelloy B3 Pipes & Tubes Inconel 600 Pipes & Tubes
 Alloy 400 Pipes & Tubes Hastelloy X Pipes & Tubes Inconel 601 Pipes & Tubes
 Alloy 625 Pipes & Tubes Incoloy 800 / 800H / 800HT Pipes & Tubes Inconel 625 Pipes & Tubes
 Alloy 825 Pipes & Tubes Incoloy 825 Pipes & Tubes Inconel 718 Pipes & Tubes
Alloy 188 Pipes & Tubes Incoloy 925 Pipes & Tubes Inconel 617 Pipes & Tubes
L-605 Pipes & Tubes Incoloy 330/ SS 330/ Ra 330 Pipes & Tubes Inconel 660A Pipes & Tubes

Nickel 200 - Pipes & Tubes

Nickel 200 and Nickel 201 are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. Nickel 201 was a modification of 200 to control carbon (.02 max) which keeps it from being embrittled by intergranular precipitates at temperatures of 600° F to 1400° F in many processes. Typically, the elemental restrictions of both, nickel 200 and nickel 201, are combined into one, dual-certified chemistry resulting in a single alloy with the desired characteristics of both alloys, Nickel 200/201.

Nickel 201 - Pipes & Tubes

Nickel 201 are solid solution strengthened, commercially pure wrought materials with good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides. Nickel 201 was a modification of 200 to control carbon (.02 max) which keeps it from being embrittled by intergranular precipitates at temperatures of 600° F to 1400° F in many processes. Typically, the elemental restrictions of both, nickel 201 and nickel 201, are combined into one, dual-certified chemistry resulting in a single alloy with the desired characteristics of both alloys, nickel 201/201.

Inconel Pipes & Tubes

Inconel 600, UNS N06600, 3074 / NA 14, 2.4816, NiCr 15 Fe, 15Cr-8Fe-Ni, B163,NCF600(JISG4904) Pipes & Tubes
Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures. The high nickel content in Inconel 600 enables it to retain considerable resistance under reducing conditions, makes it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Typical applications of this nickel alloy include the chemical, pulp and paper, aerospace, nuclear engineering and heat treating industries.

Inconel 601, UNS N06601, 2.4851, NiCr 23 Fe, 23Cr-1.4Al-Ni, B163 Pipes & Tubes
Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation, remaining highly resistant to oxidation through 2200° F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling. This nickel alloy has good high temperature strength, and retains its ductility after long service exposure. It has good resistance to aqueous corrosion, high mechanical strength, and is readily formed, machined and welded. Inconel 601’s properties make it a material of broad utility in fields like thermal processing, chemical processing, pollution control, aerospace, and power generation. However, alloy 601 is not suggested for use in strongly reducing, sulfur bearing environments. We also keep stock of Inconel Alloy 601 UNS N06601 Plates & Sheets.

Inconel 660A, S66286 Pipes & Tubes
Alloy A286® has high strength and good corrosion resistance; therefore, it is used for applications at temperature up to 1300° F. Alloy A286® can be hardened and strengthened by heat treatment. Alloy A286® has been used in jet engines, superchargers, turbine wheels, blades, casings, afterburner parts, and fasteners.  Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Inconel 718, Alloy 718, Haynes® 718, Nicrofer® 5219, Allvac® 718, Altemp® 718, ASTM B637, B 670, B 906, UNS N07718 Pipes & Tubes
Inconel 718 is a nickel-chromium-molybdenum alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion. This nickel steel alloy also displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F. One of the distinguishing features of Inconel 718’s composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloy’s matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition. This superalloy is used in a variety of industries such as aerospace, chemical processing, marine engineering, pollution-control equipment, and nuclear reactors.

Incoloy 825, 20Cr-35Ni-2Mo-3Cu-Nb, N08825, B163, 2.4858, NCF825(JISG4904), 3074 / NA 16, NiCr 21 Mo Pipes & Tubes
Incoloy 825 is a nickel-iron- chromium alloy with titanium, copper, and molybdenum. Incoloy® 825's chemical composition provides great resistance to many corrosive environments, such as pitting, crevice corrosion, intergranular corrosion, and stress- corrosion cracking. Incoloy 825 has good mechanical properties from moderately to high temperatures. The hot - working range for Incoloy 825 is 1600 to 2150° F. The material has good weldability by all conventional processes.
These inconel 825, alloy 825 and incoloy 825 available in various forms like seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, fasteners, cap, elbow, erw pipes, reducer, round bar, tee, tube, pipe fittings and flanges like inconel 825 plate, inconel 825 erw pipes, inconel 825 flange, inconel 825 cap, inconel 825 elbow, inconel 825 reducer, inconel 825 sheet, inconel 825 tube etc.
Also offers uns n08825 flange, alloy 825 fittings, uns n08825 reducer, alloy 825 cap, uns n08825 plate, alloy 825 tube and many more.
Wide range of alloy 825 is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube.
UNS N08825 is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube.
Incoloy 825, alloy 825 and inconel alloy 825 is a nickel-iron-chromium alloy with additions of molybdenum, copper and titanium. The resistance of Incoloy 825 to general and localized corrosion under diverse conditions gives the alloy broad usefulness.

Incoloy 800, 800H, 800HT, ASTM B 409, B 408, B 407, B 564, UNS N08800/N08810/N08811, 20Cr-30Ni, B163, 1.4558, 1.4876, NCF800(JISG4904), NCF800H(JIS4904), 3074 / NA 15, X 10 Ni Cr-AlTi 32 20 Pipes & Tubes
Incoloy 800 is a combination of nickel and chromium alloy that has excellent tensile strength and resistance to oxidation as well as carburzation properties. This alloy is extremely functional as it maintains a stable structure, even when exposed to high temperature. The Inconel is extremely resistant to corrosion, even in acidic environment.
This inconel 800, alloy 800 and incoloy 800 can be availed in many forms like seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, fasteners, cap, elbow, erw pipes, reducer, fasteners, cap, elbow, erw pipes, reducer, round bar, tee, tube, round bar, tee, tube, forgings, pipe fittings and flanges like inconel 800 plate, inconel 800 fasteners, incoloy 800 seamless pipes, inconel 800 plate, inconel 800 tube, inconel 800 fittings, inconel 800 round bar, incoloy 800 round bar, alloy 800 tube, incoloy 800 tube, incoloy 800 tee etc.
Also offers alloy 800 seamless pipes, uns n08800 erw pipes, alloy 800 tee, uns n08800 elbow, alloy 800 sheet, uns n08800 plate, inconel 600 pipes, inconel 625 seamless pipes and many more.
Wide range of alloy 800 is manufactured and exported in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube. Alloy 800 is a widely used material of construction for equipment that must resist corrosion, have high strength or resist oxidation and other harmful effects of high-temperature exposure.
Inconel Alloy 800 is used for process piping, heat exchangers, heating-element sheathing, carburizing equipment, and nuclear steam-generator tubing. UNS N08800 is available in various forms like cap, elbow, erw pipes, fasteners, fittings, flange, plate, reducer, round bar, seamless pipes, sheet, tee and tube at industrial rate.

Monel Pipes & Tubes

Monel 400, Alloy 400, UNS N04400, 3074 / NA 13, 2.4360, NiCu 30 Fe Pipes & Tubes
Monel 400 is a nickel-copper alloy (about 67% Ni – 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel alloy is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. As would be expected from its high copper content, alloy 400 is rapidly attacked by nitric acid and ammonia systems. Monel 400 has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000° F, and its melting point is 2370-2460° F. However, alloy 400 is low in strength in the annealed condition so, a variety of tempers may be used to increase the strength.

Monel K500, Alloy K-500, UNS N05500, 3074 / NA 18, 2.4375, NiCu 30 Al Pipes & Tubes
Monel K500 is a precipitation-hardenable nickel-copper alloy that combines the excellent corrosion resistance characteristic of Monel 400 with the added advantage of greater strength and hardness. These amplified properties, strength and hardness, are obtained by adding aluminum and titanium to the nickel-copper base and by a thermal processing used to effect precipitation, typically called age hardening or aging. When in the age-hardened condition, Monel K-500 has a greater tendency toward stress-corrosion cracking in some environments than Monel 400. Alloy K-500 has approximately three times the yield strength and double the tensile strength when compared with alloy 400. Plus, it can be further strengthened by cold working prior to precipitation hardening. The strength of this nickel steel alloy is maintained to 1200° F but stays ductile and tough down to temperatures of 400° F. Its melting range is 2400-2460° F. This nickel alloy is spark resistant and non-magnetic to -200° F. However, it is possible to develop a magnetic layer on the surface of the material during processing. Aluminum and copper may be selectively oxidized during heating, leaving a magnetic nickel rich film on the outside. Pickling or Monel K-500 Barsbright dipping in acid can remove this magnetic film and restore the non-magnetic properties

Monel R-405, UNS N04405, 13Cr-Al, S40500, A268 TP405, 1.4002, SUS405(JISG3463) Pipes & Tubes
Monel R405 is the free machining version of Monel 400. It is a nickel-copper alloy with a controlled amount of sulfur added to provide sulfide inclusions that act as chip breakers during machining. Like Monel 400, alloy R-405 is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Monel R405 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion-resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions. This nickel steel alloy is particularly resistant to hydrochloric and hydrofluoric acidswhenthey are de-aerated. As would be expected from its high copper content, alloy R-405 is rapidly attacked by nitric acid and ammonia systems. As with alloy 400, Monel R-405 is virtually immune to chloride ion stress corrosion cracking in typical environments. Generally, its corrosion resistance is very good in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous. Nevertheless, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures. Monel 400 and R-405 offer about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.

Hastelloy Pipes & Tubes

Hastelloy C-22, Alloy C-22, UNS N06022, 2.4602, Ni Cr 21Mo 14 W, 21Cr-13Mo-3W-Ni, B622, NW6022(JISH4552) Pipes & Tubes
Hastelloy C22, also known as alloy C22, is a versatile austenitic nickel-chromium-molybdenum-tungsten alloy with enhanced resistance to pitting, crevice corrosion and stress corrosion cracking. The high chromium content provides good resistance to oxidizing media while the molybdenum and tungsten content give good resistance to reducing media. This nickel steel alloy also has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric acid or oxidizing acids with chlorine ions. Other corrosives Hastelloy C-22 has resistance to are oxidizing acid chlorides, wet chlorine, formic and acetic acids, ferric and cupric chlorides, sea water, brine and many mixed or contaminated chemical solutions, both organic and inorganic. This nickel alloy also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams. This is beneficial in multi- purpose plants where such “upset” conditions occur frequently.
This nickel alloy resists the formation of grain-boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition. Alloy C-22 should not be used in service temperatures above 1250° F due to the formation of detrimental phases which form above this temperature.

Hastelloy C-276, Alloy C-276, UNS N10276, 2.4819, NiMo 16Cr15W, 15.5Cr-16Mo-5Fe-Ni, B622, NW0276(JISH4552) Pipes & Tubes
Hastelloy C276 is a nickel-molybdenum-chromium superalloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments. The high nickel and molybdenum contents make the nickel steel alloy especially resistant to pitting and crevice corrosion in reducing environments while chromium conveys resistance to oxidizing media. The low carbon content minimizes carbide precipitation during welding to maintain corrosion resistance in as-welded structures. This nickel alloy is resistant to the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process application in an as welded condition.
Although there are several variations of the Hastelloy nickel alloy, Hastelloy C-276 is by far the most widely used. Alloy C-276 is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas.

Hastelloy X, UNS N06002, DIN 2.4665 Pipes & Tubes
Hastelloy X is a nickel-chromium-iron-molybdenum superalloy with outstanding high temperature strength, oxidation resistance, and fabricability. Alloy X’s oxidation resistance is excellent up to 2200° F. This nickel steel alloy has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. Matrix stiffening provided by the molybdenum content results in high strength in a solid-solution alloy having good fabrication characteristics. Although this nickel alloy is primarily noted for heat and oxidation resistance it also has good resistance to chloride stress-corrosion cracking, carburization, and excellent resistance to reducing or carburizing atmospheres. Two common conditions that often lead to early failure in high temperature alloys, carburization and nitriding, Hastelloy X resists.

Hastelloy B-2, Alloy B-2, UNS N10665, 2.4617, Ni Mo 28 Pipes & Tubes
Hastelloy B2 is a solid solution strengthened, nickel-molybdenum alloy, with significant resistance to reducing environments like hydrogen chloride gas, and sulfuric, acetic and phosphoric acids. Molybdenum is the primary alloying element which provides significant corrosion resistance to reducing environments. This nickel steel alloy can be used in the as-welded condition because it resists the formation of grain-boundary carbide precipitates in the weld heat-affected zone. This nickel alloy provides excellent resistance to hydrochloric acid at all concentrations and temperatures. In additions, Hastelloy B2 has excellent resistance to pitting, stress corrosion cracking and to knife-line and heat-affected zone attack. Alloy B2 provides resistance to pure sulfuric acid and a number of non-oxidizing acids.

Hastelloy B-3, UNS N010675 Pipes & Tubes
Hastelloy B-3 is a nickel-molybdenum alloy with excellent resistance to pitting, corrosion, and stress-corrosion cracking plus, thermal stability superior to that of alloy B-2. In addition, this nickel steel alloy has great resistance to knife-line and heat–affected zone attack. Alloy B-3 also withstands sulfuric, acetic, formic and phosphoric acids, and other non-oxidizing media. Furthermore, this nickel alloy has excellent resistance to hydrochloric acid at all concentrations and temperatures. Hastelloy B-3’s distinguishing feature is its ability to maintain excellent ductility during transient exposures to intermediate temperatures. Such exposures are routinely experienced during heat treatments associated with fabrication.

  DIN AFNOR UNS Others
Hastelloy B-2 2.4882 GNiMo30 - N30012 Hastelloy B-2(5)
Hastelloy B-3 - - N10675 Hastelloy B-3(5)
Hastelloy Hybrid BC1 - - - Hastelloy Hybrid BC1
Hastelloy C-276 2.4686 GNiMo17Cr - N30002 Hastelloy C-276 (5)
Hastelloy C-4 2.4610 NiMo16C616Ti (5) NC16D16M N26455 Hastelloy C-4 (5)
Hastelloy C-22 9.4602 - N26022 Hastelloy C-22 (5)
Hastelloy C-2000 - - N26200 Hastelloy C-2000 (5)
Hastelloy C-22HS - - - Hastelloy C-22HS (5)
Hastelloy G-30 - - N06030 Hastelloy G-30 (5)
Hastelloy G-35 2.4643 NiCr33Mo8 - N06035 Hastelloy G-35 (5)

Incoloy Alloy 800/800H/800HT UNS N08800/N08810/N08811 Pipe & Tube

Arrow Pipes & Plates Industries exports a wide range of Incoloy Alloy 800/800H/800HT Pipes & Tubes (ASTM B407, ASTM B163, ASTM B358, ASTM B515, ASME SB407, ASME SB163, ASME SB358, ASME SB 515), Incoloy Alloy 800/800H/800HT Pipes & Tubes Exporter in Mumbai, India, Incoloy Alloy 800/800H/800HT Pipes Exporter in Mumbai India, Incoloy Alloy 800/800H/800HT Tubes Exporter in Mumbai India, 800/800H/800HT Incoloy Alloy Seamless Pipes & Tubes, Incoloy Alloy UNS N08800/N08810/N08811 Pipes & Tubes, Incoloy Alloy 800/800H/800HT Piping & Tubing, Incoloy Alloy DIN 1.4876/1.4958/1.4859 Pipes & Tubes, 800/800H/800HT Incoloy Alloy Seamless Tubes & Pipes, Incoloy Alloy UNS N08800/N08810/N08811 Welded Pipes & Tubes, 800/800H/800HT Incoloy Alloy ERW Pipes & Tubes, Incoloy Alloy DIN 1.4876/1.4958/1.4859 Seamless & Welded Pipes & Tubes Stockists, 200 Alloy Pipes & Tubes Exporters.

Nickel Alloy 200 - UNS N02200 - Ni - B 161
Alloy 31 - UNS N08031 Low-C-Ni-Fe-Cr-Mo-Cu - B 619, B 622, B 626
Nickel Alloy 201 - UNS N02201 Ni,Low C - B 161
Haynes HR-120 - UNS N08120 Ni-Cr-Fe - B 407, B 514, B 515
Monel 400- UNS N04400 Ni-Cu - B 165
Alloy 330 - UNS N08330 Ni-Fe-Cr-Si - B 535, B 710
Hastelloy G - UNS N06007 Ni-Cr-Fe-Mo-Cu - B 619 B 622 B 626
Alloy AL6XN - UNS N08367 Fe-Ni-Cr-Mo-N - B 675, B 676, B 690
Hastelloy C22 - UNS N06022 Low C-Ni-Mo-Cr - B 619, B 622, B 626
Incoloy 800 - UNS N08800 Ni-Fe-Cr - B 407, B 514, B 515
Alloy 602 CA - UNS N06025 NI-Cr-Fe - B 163 B 167
Incoloy 800H - UNS N08810 Ni-Fe-Cr - B 407, B 514, B 515
Alloy G30 - UNS N06030 Ni-Cr-Fe-Mo-Cu - B 619, B 622, B 626
Alloy 800HT - UNS N08811 Ni-Fe-Cr - B 407
Hastelloy G-35 - UNS N06035 Ni-Cr-Mo - B 619, B 622, B 626
Incoloy 825 - UNS N08825 Ni-Fe-Cr-Mo-Cu - B 423, B 704, B 705
Hastelloy G-35 - UNS N06035 Ni-Cr Mo - B 619, B 622, B 626
Alloy 904L - UNS N08904 Low C-Ni-Fe-Cr-Mo-Cu - B 673, B 674, B 677
Alloy 45TM - UNS N06045 Ni-Cr-Fe - B 163, B 167
Incoloy Alloy 25-6MO - UNS N08925 Low C-Ni-Fe-Cr-Mo-Cu - B673, B 674, B 677
Alloy - UNS N06058 Ni-Cr-Mo Low C - B 619, B 622, B 626
Incoloy 926 - UNS N08926 Low C-Ni-Fe-Cr-Mo-Cu-N- B 673,B 674, B 677
Alloy 59 - UNS N06059 Low C-Ni-Cr-Mo - B 619, B 622, B 626
Hastelloy-B - UNS N10001 Ni-Mo- B 619, B 622, B 626
Hastelloy C-2000 - UNS N06200 Low C-Ni-Cr-Mo-Cu - B 619, B 622, B 626
Hastelloy N - UNS N10003 Ni-Mo-Cr-Fe
Alloy T21- UNS N06210 Low C-Ni-Cr-Mo-Ta - B 619, B 622, B 626
Haynes - UNS N10242 Ni-Mo-Cr-Fe -B 619, B 622, B 626
Haynes Alloy 230 - UNS N06230 Ni-Cr-W-Mo - B 619, B 622, B 626
Hastelloy C-276 - UNS N10276 Low C-Ni-Mo-Cr - B 619, B 622, B 626
Alloy C4- UNS N06455 Low-C-Ni-Mo-Cr- B 619, B 622, B 626
Alloy B-10 - UNS N10624 Low-C-Ni-Mo-Cr-Fe - B 619, B 622, B 626
Incoloy 600 - UNS N06600 Ni-Cr-Fe - B 167, B 516, B 517
Hastelloy B-4 - UNS N10629 Ni-Mo - B 619, B 622, B 626
Alloy - UNS N06603 Ni-Cr-Fe-Al - B 163 B167 B 516 B 517
Hastelloy B2 - UNS N10665 Ni-Mo - B 619, B 622, B 626
Alloy 625 - UNS N06625 Ni-Cr-Mo-Cb - B 444, B 704, B 705
Hastelloy B3 - UNS N10675 Ni-Mo - B 619, B 622, B 626
Inconel 686 - UNS N06686 Low C-Ni-Cr-Mo - B 163, B 619, B 622, B 626
Haynes HR-160 - UNS N12160 Ni-Co-Cr-Si - B 619, B 622, B 626
Nickel Alloy - UNS N06219 Ni-Cr-Mo-Si - B 444, B 704, B 705
Alloy 33 - UNS N20033 Low C-Cr-Ni-Fe-Ni - B 619, B 622, B 626
Hastelloy(R) G-3 - UNS N06985 Ni-Cr-Fe-Mo-Cu - B 619, B 622, B 626
Haynes(R) 556 - UNS N30556 Ni-Fe-Cr-Co - B 619, B 622, B 626
Alloy 20 - UNS N08020 Cr-Ni-Fe-Mo-Cu-Cb - B 464, B 468, B 729
 

Chemical & Physical Properties of High Nickel Alloys Pipes

Chemical Composition (Part 1/2)

Nominal Composition wt. %
  Nickel Copper Iron Manganese Carbon Silicon Sulfur
Nickel 200 99.0min 0.25max 0.40max 0.35max 0.15max 0.35max 0.010max
Monel 400 63.0min 28.0-34.0 2.50max 2.00max 0.30max 0.50max 0.024max
Inconel 600 72.0min 0.50max 6.00-10.00 1.00max 0.15max 0.50max 0.015max
Inconel 601 58.0-63.0 1.00max Bal. 1.00max 0.10max 0.50max 0.015max
Inconel 625 58.0min   5.00max 0.50max 0.10max 0.50max 0.015max
Incoloy 800 30.0-35.0 0.75max 39.50min 1.50max 0.10max 1.00max 0.015max
Incoloy 800H 30.0-35.0 0.75max 39.50min 1.50max 0.05-0.10 1.00max 0.015max
Incoloy 800HT 30.0-35.0 075max 39.5min 1.50max 0.06-0.10 1.00max 0.015max
Incoloy 803 32.0-37.0 0.75max Bal. 1.50max 0.06-0.10 1.00max 0.015max
Incoloy 825 38.0-46.0 1.50-3.00 22.00min 1.00max 0.05max 0.50max 0.03max
C-276 Bal.   4.00-7.00 1.00max 0.01max 0.08max 0.03max
Alloy 020 32.00-38.00 3.00-4.00 Bal. 2.00max 0.07max 1.00max 0.035max

(Part 2/2)

  Cobalt Aluminum Titanium Chromium Molybdenum Tungsten Vanadium   Phosphorus Niobium+Tantalum
Nickel 200                    
Monel 400                    
Inconel 600       14.0-17.0            
Inconel 601   1.00-1.70   21.0-25.0            
Inconel 625 1.00max 0.40max 0.40max 20.00-23.00 8.00-10.00       0.015max 3.15-4.15
Incoloy 800   0.15-0.60 0.15-0.60 19.0-23.0            
Incoloy 800H   0.15-0.60 0.15-0.60 19.0-23.0            
Incoloy 800HT   0.85-1.20 0.25-0.60 19.0-23.0            
Incoloy 803   0.15-0.60 0.15-0.60 25.0-29.0            
Incoloy 825   0.20max 0.60-1.20 19.50-23.50 2.50-3.50          
C-276 2.50max     14.50-16.50 15.00-17.00 3.00-4.50 0.35max   0.04max  
Alloy 020       19.00-21.00 2.00-3.00       0.045max 8xC-1.00

Mechanical Properties

Nickel Mechanical Properties
  Tensile psi Tensile Mpa Yield psi*Yield Mpa*Elongation %Hardness, HV
Nickel
200
68,000 469 27,000 186 47 171
Monel 400 82,000 565 39,000 269 45 137
Inconel
600
99,000 683 45,000 310 43 160
Inconel
601
92,000 634 40,000 276 56 137
Inconel
625
130,000 896 70,000 483 50 183
Incoloy
800
85,000 586 42,000 290 45 155
Incoloy
800H
80,000 552 35,000 241 45 145
Incoloy
800HT
80,000 552 35,000 241 45 145
Incoloy
803
89,000 614 46,000 317 47 143
Incoloy
825
100,000 690 45,000 310 45 155
INCO
C-276
115,000 793 50,000 345 60 188
INCO 020 99,000 683 60,000 414 35 148

 

Translate »